FEATURES
In an Elent CVT, the AC mains powers the input winding which is widely separated physically from the isolated output winding. The input winding normally runs at very moderate Flux linkage levels. The output winding exhibits an intrinsic energy characteristic and this energy storage operates in conjunction with mains capacitor to produce self-generated AC flux field which is indirectly excited from the input winding.
The result is instantaneous voltage regulation. No transient and spikes. Sinewave output. A perfect answer and remedy for every electronic equipment.

SALIENT FEATURES

• No semiconductors or moving parts used, hence very high reliability
• No feedback control used
• Intrinsic current limiting and short circuit protection
• Output voltage correction within ½ Cycle ( 10 ms) from no load to full load for specified load and line variation
• Short term over load capability
• Energy storage for line loss up to 3 ms at typical loads
• Higher input voltage control range, for loads less than rated load
• Very high line transient/spike rejection capability and excellent input to output isolation characteristics
• Output floating (optional)

Range
Elent CVT is available in a wide range.. from 50 VA to 10,000 VA with load test conducted at unity power factor for all ratings. For configurations other than those mentioned above, please contact our office.

FIELDS OF APPLICATION
Computers, Data Processing equipment, Colour Photography Labs., Bio-medical equipment, PA equipment, Telecommunication, TV, VCD/DVD recorders & players, Teleprinters, Fax machines and all other sensitive electronic devices.

Constant Voltage Transformer (CVT)

FEATURES
Based on state-of-the-art technology, the Series E UPS systems protect your computers by providing only regulated AC mains voltage. The Series E UPS range has various models to provide back-up power stretching from 10 minutes to 4 hours depending on the connected external battery bank.

Main Features

• Built in AVR
• Short circuit protection
• Cold start provided
• Overload protection
• Low Battery cut-off

WITH Built-in SMF Batteries

E Series Without Battery- Batteries to be connected externally

FEATURES

• True On-Line Double Conversion type UPS System
• IGBT technology design
• Pure Sinewave output
• Bypass provided
• Compact and well engineered architecture
• Neutral isolation design
• High input power factor >0.97
• Full bridge inverter
• Overload and output short circuit protection
• Wide input tolerance range
• Smooth and silent operation
• Fast correction rate for line and load regulation
• Compatible with the intelligent data protection package
• Easy to install, use and maintain
• Superior performance to price analysis

Online UPS with isolation transformer

Features

• True On-Line Double Conversion type UPS
• High Frequency PWM design using IGBT/MOSFET
• Compact and well engineered architecture
• Ultimate protection against all power line disturbances
• We de input voltage tolerance range
• Suitable for all types and capacities of batteries
• Suitable for all types and capacities of batteries
• Neat and clean flat cable wiring
• Pure Sinewave output
• Smooth and silent operation
• Complete annunciation on the front panel
• Excellent dynamic response for step load change
• Short circuit/overload protected
• Fast correction rate for line and load regulation
• High inrush/peak current loading capability
• Computer communication compatibility as a standard feature
• Easy to install, use and maintain
• Lowest running and operational expenditure
• Superior performance to price analysis

Features

• Output A.C Voltage correction for wide input variations
• 1% regulation
• No output waveform distortion
• Fast correction of output voltage: 20V/sec.
• Output self adjustable for a range of ±5%
• Auto/manual operation facility
• Under-voltage and over-voltage cut-out arrangement
• Voltmeter with facility to read input or output voltage
• High efficiency
• Compact and modular construction for ease in servicing
• M.C.B. on input circuit

WITH OV/UV & TIMER

Design : The AC mains powers the input winding which is widely separated physically form the isolated output winding. The input winding normally runs at very moderate Flux linkage levels. The output winding exhibits on intrinsic energy storage characteristic and this energy storage operates in conjunction with mains capacitor to produce self-generated AC flux field which is indirectly excited from the input windings.

Result : Instantaneous Voltage regulation. No Transient and Spikes, Sinewave output. A perfect answer and remedy for every electronic equipment.

Features

• No Semiconductors or moving parts used, hence very high reliability
• No feedback control used
• Intrinsic current limiting and short circuit protection
• Output voltage correction within 1/2 Cycle (10 milliseconds) from no load to full load for specified load & line variation
• Short term over load capacity
• Energy storage for line loss upto to 3 milli seconds at typical load
• Higher input voltage control range, for loads less than rated load
• Very high line transient/spike rejection capability and excellent isolation characteristic
• Output floating (Optional)